/

/

Cold email and deliverability

Cold email and deliverability

What Is Email Deliverability? How to Improve It

// Short answer

Deliverability is an email's ability to reach the recipient's primary inbox, not the spam or promotions folder. To improve it, take care of your sender reputation, authenticate your domain with SPF, DKIM and DMARC, keep a clean contact list, gradually increase sending volume (warm-up) and avoid spam words. A good rate is around 95%.

By Benedicte Rivory

7 min read

Your emails go out but do not always reach the inbox. This guide explains what deliverability is, what poor deliverability costs and how to improve it, with a one-month warm-up plan.

Your emails go out but do not always reach the inbox. This guide explains what deliverability is, what poor deliverability costs and how to improve it, with a one-month warm-up plan.

For years, inboxes were flooded: out of 10 emails, more than 9 were spam. The result: stricter filters, finer rules and zero tolerance for suspicious signals.

Today, if your messages, including your cold emailing campaigns, are to reach the right inbox, they must inspire trust from the very first batch sent.

The key is called deliverability. It is the ability to get an email into the inbox, not into spam. In short: technical credibility + sending hygiene = emails that get read.

What is deliverability?

Deliverability refers to an email's ability to reach the recipient's primary inbox. It goes beyond simple "delivery": a message can be accepted by the server and still end up in the spam or promotions folder.

In other words, delivery says that an email was technically received; deliverability measures whether it arrived in the right place, where it will actually be seen. As a benchmark, a good deliverability rate is around 95%, a level that can transform the effectiveness of your campaigns.

The consequences of poor deliverability

When deliverability degrades, the impact goes far beyond the inbox.

❌ Visibility drops Messages slip into spam or secondary tabs, sometimes with throttling or blocking. Opens mechanically decline, and so do response rates.

❌ The snowball effect on reputation Less visibility leads to less engagement, which in turn tightens the filters. Getting out of this cycle takes weeks of effort.

❌ Lost business and lower ROI Fewer opens, fewer replies, a pipeline that empties, longer sales cycles and a rising cost of acquisition.

❌ A weakened brand image Unsubscribes and complaints increase, trust erodes, and your domain may be seen as intrusive.

❌ Operational burden and risks Remediation plans, audits, domain or IP migrations, and possible exposure to penalties if compliance was neglected.

Key takeaway: stabilize, clean, authenticate, then accelerate. This progression protects your inbox placement and your sales results.

How to improve email deliverability?

Deliverability is built over time: technical hygiene, a controlled sending pace and a relevant message. The goal: inspire enough trust in Gmail or Outlook to stay in the primary inbox.

1. Sender reputation

Reputation is the top-priority signal. Providers evaluate your domain and IP based on your sending practices. This scoring drives placement: inbox, promotions or spam. Two components add up: the sending IP and the domain used.

To improve it, focus on the essentials:

  • Making unsubscribing instant reduces complaints.

  • Remove invalid addresses and monitor bounces

  • Stabilizing your sending pace, with warm-up of new domains, avoids suspicious spikes.

  • Prioritizing engaged contacts, then gradually expanding, supports your score.

  • Tracking opens, clicks and replies, then continuously adjusting segments, maintains your reputation.

2. Technical domain authentication

To prove that a sender is legitimate, three protocols act as the ID card of your emails. They work together and must be aligned on the same domain.

SPF (Sender Policy Framework)

A DNS record that lists the IPs authorized to send messages for a domain. It limits spoofing and helps block fraudulent sends.

DKIM (DomainKeys Identified Mail)

A digital signature added to the message. It lets the receiving server verify that the content was not modified in transit.

DMARC (Domain-based Message Authentication, Reporting & Conformance)

A policy that specifies what to do if SPF or DKIM fails (let it through, quarantine, reject) and that provides tracking reports useful for monitoring deliverability. To go further: technical resources on DMARC.

These settings are essential and mandatory for good deliverability and successful email campaigns.

3. Contact list quality

The health of your database has a direct impact on deliverability. Sending to invalid addresses or disengaged contacts lowers your sender score and increases spam placement.

Best practices:

✔️ Build your own list : buying lists fuels bounces, spam traps and complaints. Rely as much as possible on verified contacts.

✔️ Clean the list : remove persistently inactive contacts and hard bounces to keep your sends healthy.

✔️ Turn on double opt-in : email confirmation guarantees a genuinely interested and more reliable database.

In addition, state the type of content and the frequency at sign-up, and keep the unsubscribe link visible to limit complaints.

4. Sending volume and frequency

Providers detect abnormal behavior. A brand-new domain that suddenly sends thousands of emails immediately raises suspicion and ends up outside the inbox. The fix is warm-up: gradually increase sending volume over several weeks, starting with your most engaged contacts. This ramp-up, combined with a stable and predictable pace, builds a reliable reputation and limits suspicious spikes.

Example of a one-month plan (adjust based on your metrics)

  1. Days 1–3 : 50 emails/day, only to highly engaged contacts (opened/clicked <30 days).

  2. Days 4–7 : 100 emails/day, same segments + small pockets of recently engaged contacts.

  3. Week 2 (D8–14) : 200–300 emails/day, 3 sends/week, no more than 1 campaign/day.

  4. Mid-week 2 : if hard bounces < 0.5–2% and complaints < 0.1%, move up to 300–400/day.

  5. Week 3 (D15–21) : 400–600 emails/day, expand to contacts engaged in the last 30–90 days, purge inactive contacts.

  6. End of week 3 : A/B test subject lines and pace on small sub-segments, stay < 2 campaigns/day.

  7. Week 4 (D22–28) : 800–1200 emails/day, carefully introduce lukewarm segments, keep sending pressure stable.

  8. Days 29–30 : full review of metrics, stabilize at 2–4 campaigns/week before any further increase.

5. "Spam words": what they are and why they are risky

A "spam word" is a term or phrase that increases the probability of a message being classified as junk. On its own, it is not necessarily blocking, but combined with other signals (outsized promises, artificial urgency, CAPITAL LETTERS, "!!!", dubious links), it degrades primary inbox placement and encourages complaints.

Common examples (use sparingly)

  • Urgency / pressure : limited offer, last chance, don't wait, act now, exclusive.

  • Money / finance : 100% guaranteed, risk-free, make money, passive income, easy credit, incredible rate.

  • Aggressive promotions : free today, guaranteed gift, exceptional discount, great deal, bargain.

  • Health / "miracles" : fast weight loss, guaranteed result, miracle solution, detox, instant anti-aging.

  • Manipulation / scams : click here now, you have been selected, congratulations, lottery, prize won.

  • Tech / crypto (depending on context) : easy mining, guaranteed returns, double your earnings.

  • Forms to avoid : distorted words (fr€e, f.r.e e), SUBJECT LINES IN CAPITALS, multiple exclamation marks (!!!), strings of emojis.

Favor factual, verifiable wording. Use a sober tone and a single clear call to action, and test on a small sample before a large send.

How do you know if an email is actually delivered?

Without measurement, there is no steering. Deliverability shows up in a few simple signals to track with every send, then over time.

Benchmarks to monitor

  • Spam complaint rate: the main warning signal; above a low threshold, reputation degrades quickly.

  • Bounces: an indicator of database quality and address hygiene.

  • Actual placement: inbox vs promotions vs spam, observed on a test sample.

  • Useful engagement: opens, clicks, replies and unsubscribes (too much inactivity = future risk).

Before sending at scale, a pre-test helps detect weak points in the message and the infrastructure. Tools like Mail-Tester or Glock Apps give a deliverability score with ideas for improvement. For ongoing reputation monitoring, SenderScore and Google Postmaster Tools help you anticipate drifts and correct course quickly.

Today, most prospecting tools also let you track sends and opens.

Conclusion

Deliverability is not a detail: it is the entry point of prospecting. It comes from a clean technical foundation, a healthy database and controlled sending. When these three pillars hold, emails arrive, conversations start and the pipeline grows.

The next step is to industrialize these best practices: solid authentication, continuous cleaning, warm-up, segmentation by engagement, monitoring of signals. The goal is simple: stable visibility, without ups and downs.

Want to move faster with a structured approach and tools that respect these standards? Discover Scalability!

// Need help?

Outbound that books qualified meetings

Our experts and AI agents build and run your B2B prospecting.

// Key takeaways

  • Delivery and deliverability differ: an accepted email can still end up in spam

  • A good deliverability rate is around 95%

  • SPF, DKIM and DMARC must be aligned on the same domain

  • Warm-up: start at 50 emails per day to your most engaged contacts

  • Warning thresholds: hard bounces under 0.5 to 2%, complaints under 0.1%

Frequently asked questions

What is the difference between email delivery and deliverability?

Delivery only indicates that a server technically accepted the message. Deliverability measures whether it arrives in the right place, meaning the primary inbox where it will be seen. An email can therefore be delivered and still end up in the spam folder or the promotions tab, which makes opens and replies drop.

What are SPF, DKIM and DMARC for?

SPF lists in the DNS the servers authorized to send for your domain. DKIM adds a digital signature that proves the message was not modified in transit. DMARC specifies what to do if SPF or DKIM fails (let it through, quarantine or reject) and provides tracking reports. All three must be configured and aligned.

How do you warm up a new sending domain?

Ramp up over several weeks. This guide suggests 50 emails per day for the first three days to highly engaged contacts, 100 up to day seven, 200 to 300 in week two, 400 to 600 in week three, then 800 to 1,200 in week four. Only increase if bounces and complaints stay below the thresholds.

How can you check that your emails reach the inbox?

Track the complaint rate, bounces, actual placement (primary inbox, promotions or spam) on a test sample, and engagement: opens, clicks, replies, unsubscribes. Before a large send, tools like Mail-Tester or GlockApps assign a score. For ongoing monitoring, SenderScore and Google Postmaster Tools help you anticipate drifts.

Are spam words enough to send an email to spam?

On its own, a spam word is not necessarily blocking. The risk comes from combining it with other signals: outsized promises, artificial urgency, subject lines in capitals, multiple exclamation marks, distorted words or dubious links. Favor factual wording, a sober tone and a single call to action, and test on a small sample before a large send.